2010 Honda Odyssey
Mileage
49,674
Service Date
12/16/2022
Services Performed
- Road tested vehicle. Inspected all fluid levels and condition. –Power Steering Fluid Technician Note: Powers Steering fluid is dirty/contaminated. – Recommendation: Power steering fluid is ok at this time. It is due to be flushed soon based on vehicle's mileage. Inspected battery, cables, hold down and load tested battery – good. Performed starter draw test – within specifications. Tested charging system output – v. Performed voltage drop test at battery cables and power lead. Inspected cooling system level and topped off as needed. Tested radiator cap for proper operation and pressure tested the system for leaks. Tested antifreeze protection – good to -30°F and Ph level good at this time. Inspected wiper blades, washer fluid, horn and mirrors. Inspected operation of all external lights. Inspected fan belts and hoses. Inspected filters and ignition components. –Cabin Air Filter Technician Note: Cabin Air filter is dirty/ plugged and needs to be replaced. – Recommendation: CABIN AIR FILTER –Fuel Induction Technician Note: During normal everyday driving, deposits accumulate on the throttle body, intake valves, and in the combustion chambers. Symptoms include: loss of power, rough idle, hesitation, misfire, pinging, knocking, fuel mileage and hard starting. – Recommendation: INDUCTION SERVICE – We recommend performing fuel induction service as part of normal maintenance. Performed complete brake system inspection. The following is amount of brake lining remaining: Left front – 4mm Right front – 4mm Left rear – 5mm Right rear – 5mm Inspected brake hydraulic system for leaks, wear and condition of fluid. Inspected tire pressures and depth. Inspected steering and suspension components. Inspected exhaust system condition. –Timing Belt Service Due Technician Note: The vehicle is approaching or has exceeded the time where the timing belt should be replaced. – Recommendation: Your vehicle's timing belt is due to be replaced.
- Drained the cooling system. Removed fan belts, timing cover and all necessary components. Replaced the front engine seals, water pump and timing belt tensioner. Installed a new timing belt. Reinstalled timing cover and fan belts. Refilled and cycled the cooling system as needed. Road tested.
- Disassembled components as necessary. Removed the cabin air filter, cleaned housing and installed a new filter.
Donna D. gave our service a 5 star review on 1/10/2023
