- Disassemble components as necessary to gain access to fuel filter and installed a new replacement.
- Power flushed and cleaned cooling system. Restored PH level and coolant protection. Protection good to -35.
- RESET MAINTENANCE LIGHT AND MESSAGE
- Road tested vehicle. Changed oil and filter. Lubricated chassis points (where applicable). Inspected all fluid levels and condition. Inspected battery, cables, hold down and load tested battery – passed. Performed starter draw test – within specifications. Tested charging system output – passed at 14.52v. Performed voltage drop test at battery cables and power lead. Inspected cooling system level and topped off as needed. Tested radiator cap for proper operation and pressure tested the system for leaks. Tested antifreeze protection – low. – recommend a coolant flush Inspected wiper blades, washer fluid, horn and mirrors. – recommend replacing the wiper blades Inspected operation of all external lights. Inspected fan belts and hoses. Inspected filters and ignition components. – recommend replacing the fuel filter and perform fuel induction cleaning Performed complete brake system inspection. The following is amount of brake lining remaining: Left front – 4mm Right front – 4mm Left rear – 4mm Right rear – 4mm Inspected brake hydraulic system for leaks, wear and condition of fluid. Inspected tire pressures and depth. Inspected steering and suspension components. Inspected exhaust system condition. NOTE: Found the engine cooling fans drawing too many amps causing the engine rattle noise. Recommend replacing the cooling fan assembly.
Liz S. gave our service a 5 star review on 9/24/2020