- Inspected all hydraulic components for leaks – none. Drew brake fluid from master cylinder. Flushed and bled entire brake hydraulic system until clean. Filled and bled brakes as needed. Road tested.
- Replaced front brake pads and resurfaced front brake rotors. Road tested.
- RESET MAINTENANCE LIGHT AND MESSAGE
- Road tested vehicle. Changed oil and filter. Lubricated chassis points (where applicable). Inspected all fluid levels and condition. – found the brake fluid dirty – recommend a brake system flush Inspected battery, cables, hold down and load tested battery – passed. Performed starter draw test – within specifications. Tested charging system output – passed at 14.36v. Performed voltage drop test at battery cables and power lead. Inspected cooling system level and topped off as needed. Tested radiator cap for proper operation and pressure tested the system for leaks. Tested antifreeze protection – good to -34 and Ph level good at this time. Inspected wiper blades, washer fluid, horn and mirrors. Inspected operation of all external lights. Inspected fan belts and hoses. Inspected filters and ignition components. Performed complete brake system inspection. The following is amount of brake lining remaining: Left front – 3mm Right front – 3mm Left rear – 6mm Right rear – 6mm – recommend replacing the front brake pads and resurface the rotors Inspected brake hydraulic system for leaks, wear and condition of fluid. Inspected tire pressures and depth. Inspected steering and suspension components. Inspected exhaust system condition.
Brian H. gave our service a 5 star review on 4/15/2021